cold drawn tubes
"
Tube étiré à froid sans couture hydraulique des circuits EN10305-4 avec la production de laminage à froid
EN10305-4 Precision Steel Tubes Hydraulic Systems with Cold Drawn and Cold Rolling Production EN10305-4 seamless precision bending steel tubes of hydraulic systems Size: 6-100mm Delivery condition: +N, +C,+LC, +SR, +A 1. Standard: EN10305-4 Cold drawn Precision Seamless Steel Pipes 2. Steel Grade: E215,E235,E355, other materials upon agreement with customers. 3. Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance,
1,4462 tube sans couture étiré à froid de l'acier inoxydable S31803
Torich 1.4462/S31803/2205 Duplex Stainless Steel Seamless Pipe Type: Stainless, seamless Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: Cold Drawn,Cold Rolled Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC
Tubes de chaudière sans couture d'acier au carbone d'ASTM A556 étirés à froid
ASTM A556 Seamless Cold Drawn Carbon Steel Tube Boiler Tube for Tubular Feed Water Heaters Scope This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes,if specified,for use in tubular feed water heaters. Size : from 5/8 to 1 1/4-in 15.9-31.8mm Outerside diameter,inclusive,with minimum wall thickness equal to or greater than 0.045inch (1.1mm) Order Information: OD: 5/8’’- 1 1/4” (15.9-31.8mm) WT: ≥ 0
Tuyau d'acier sans couture étiré à froid GCr15 100Cr6 d'OSmooth Roughnes
GCr15 100Cr6 OD85XWT11.5 Seamless Steel Tube Steel Grade/Steel Material: Steel Grade mass fraction % C Si Mn P S Cr Mo GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ≤0.027 ≤0.020 1.30-1.65 ≤0.10 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 ≤0.025 ≤0.015 1.35-1.60 ≤0.10 100CrMnSi6-4 0.93-1.05 0.45-0.75 1.00-1.20 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMnSi6-6 0.93-1.05 0.45-0.75 1.40-1.70 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMo7 0.93-1.05 0.15-0.45 0.25-0.45 ≤0.025 ≤0.015 1.65-1.95 0.15-0.30 Delivery
EN10305-4 Tube hydraulique sans soudure en acier au carbone E235
EN10305-4 E235 +N Carbon Steel Seamless Precision Hydraulic Tube,6*1.0,8*1.5,10*1.5,16*1.5,25*3.0 1. Standard: EN10305-4 Cold drawn Precision Seamless Steel Pipes 2. Steel Grade: E215,E235,E355, other materials upon agreement with customers. 3. Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance, with certain heat treatment to achieve better mechanical properties for bending and pressure purposes 4. Size range: O.D.:5
Pipe sans soudure de carbone structurelle tirée à froid pour le transport par pipeline
Customized GOST 9567-75 Cold Drawn Structural Carbon Seamless Pipe For Pipeline Transport Material Specification The GOST 9567-75 standard defines the requirements for cold-drawn structural carbon seamless pipes that are used for pipeline transport. These pipes are widely used in various industries where high-quality pipes are required to ensure the efficient transportation of fluids or gases. Key Features Seamless design: The pipes are manufactured using a seamless process,
Lumineux a recuit la tuyauterie capillaire étirée à froid de tube de l'acier inoxydable 304 pour médical
304 Stainless Steel Capillary Tubing TORICH is a professional steel tubes supplier from China with over 23 years experience. We have NICE quality of Capillary Tubing,have exported 304 stainless steel capillary to India,UAE,Australia,Poland,etc Standard: Steel grade: Size: OD 0.28-10mm WT 0.08-1mm Production Process: Cold Drawn Bright Anneal etc Type : Seamless,welded Surface: Pickling, Bright 201 202 304 316 S31803 S32750 Chemical Composition(%) C ≤0.15 ≤0.15 ≤0.08 ≤0.08 ≤0
Tube sans couture EN10216-1 d'acier inoxydable de mur épais étiré à froid pour la pression
Seamless Stainless Steel Tube Cold Drawn Thick Wall Steel Tube EN10216-1 For Pressure Purposes Material The seamless stainless steel tube discussed in this article is made of high-quality stainless steel. Specification The tube conforms to the specification EN10216-1, which is specifically designed for pressure purposes. It ensures the tube's suitability for applications requiring high-pressure resistance. Chemical Composition The chemical composition of the seamless
SAE rond J525 a soudé le tube étiré à froid recuit par acier pour des pièces d'auto
SAE J525 Welded Cold Drawn Low Carbon Steel Tubing Annealed for Bending and Flaring Applications: for Bending and Flaring to Auto Parts Quick Detail: Size range: O.D.:6-350mm W.T.:1-15mm L: According to customer Order Grade: Low Carbon Steel Manufacture and Production: ERW+ DOM The tubing is made from flat-rolled steel shaped into a tubular form, the edges of which are joined and fused together by electric-resistance welding. After forming and welding, the tubing shall be
