precision seamless pipe
"
Ingénierie mécanique/générale Purposes les tubes et tuyaux sans soudure, en acier DIN EN10297 E235 E275
DIN EN10297 E235 E275 E470 Seamless Steel Tubes for Mechanical and General Engineering Purposes The Seamless Steel Tubes are produced by Cold Drawn or Cold Rolled, for small diameters below 88.9mm, the bigger diameter are produced by hot rolling. These steel tubes will be used for mechanical engineerings, could be also used as mother tube for further cold drawn production to achieve better tolerance and surface smoothness as precision steel tubes. Classification of steel
20Mn 25Mn Q275 Q295 a laminé à froid les tubes et tuyaux sans soudure, en acier GB/T 8162
20Mn 25Mn Q275 Q295 Cold drawn and Cold rolled Seamless steel tubes for structural purpose GB/T 8162 Torich produce seamless steel tubes as per standard GB/T 8162 applying in Mechanical contructure and general purpose of structure. produced by cold drawn and cold rolled with carbon and alloy steel,Like 10,20,20Mn,25Mn,20Cr,40Cr 15CrMo 45Mn2 etc. Detail spec: Size range: OD 3-420mm WT 0.5-50mm L:3-12.5m Material:Carbon steel:10,20,45,25Mn,Q295,Q345,40Mn2,20Cr,40Cr,15CrMo etc.
Acier allié rond fait sur commande des tubes et tuyaux sans soudure, en acier de TORICH 34CrMo4 avec le traitement thermique
TORICH Custom Round 34CrMo4 Alloy Steel Pipe With Heat Treatment Good surface quality Material:34CrMo4 Chemical composition: C:0.30~0.37 Si:0.10~0.40 Mn:0.60~0.90 S:permissible residual content ≤0.035 P:permissible residual content ≤0.035 Cr:0.90~1.20 Ni:permissible residual content ≤0.030 Cu:permissible residual content ≤0.030 Mo:0.15~0.30 Mechanical properties: Tensile strength σb (MPa):≥985(100) Yield strength σs (MPa):≥835(85) Elongation δ5 (%):≥12 rate of reduction in
Tubes et tuyaux sans soudure, en acier de TORICH 37Mn 30CrMo pour le cylindre de gaz GB/T18248
Products Description TORICH GB/T18248 37Mn 30CrMo Seamless Steel Tube for Gas Cylinder Standard GB/T18248 Material 37Mn, 34Mn2V, 30CrMo, 35CrMo, 34CrMo4, 30CrMnSiA Size OD: 15-800mm WT: 1.6-50 Length: 4-12m Techinique Hot Rolled or Cold Drawn Delivery Condition Hot Rolled Steel Tube: Hot Rolled Cold Drawn Steel Tube: Cold Drawn, Annealed or Normalizing Test Tensile Test, Impact Test, Hydraulic Test, Eddy Current Test, Ultrasonic Testing etc Application Low and Medium Pressure
Longueur épaisse lourde douce 1-12m de mur de tubes et tuyaux sans soudure, en acier de carbone à haute pression
TORICH Seamless Carbon Mild 300mm Large Diameter ST37 15Mo3 High Pressure 4 Inch C45 Heavyr-caliber Heavy Thick Wall Steel Pipe Size Range: OD:20-300mm WT: 5-50mm Length: Max 12000mm Characteristic: Good OD and ID tolerance controlled to Technical Standard Stable quality Tolerances: OD: D 5 – 10 mm: ± 0.15 mm D 11 – 30 mm: ± 0.30 mm D 32 – 50 mm: ± 0.40 mm D 51 – 140 mm: ± 0.8% WT: S 0.4 – 1 mm: ± 0.12 mm S 1.2 – 5 mm: ± 10% S 5.5 – 12 mm: ± 8% Notes: 1. Steel grades: 10, 20,
Tube épais étiré à froid hydraulique d'acier de précision du mur E355
Thick Wall Stainless Steel Tube E355 Steel Tube High Precision Steel Tube Steel Grade and Chemical Compositions of cold drawn precision steel tube : Steel Grade C Si Mn P S Al Steel Name Steel Number max max max max max min E215 1.0212 0.10 0.05 0.70 0.025 0.025 0.025 E235 1.0308 0.17 0.35 1.20 0.025 0.025 - E355 1.0580 0.22 0.55 1.60 0.025 0.025 - Application : Hydraulic tubes. Material: E235 St35 St45 St52 E355 Standard : DIN 2391 EN10305-1 Surface treatment: Galvanizing,
Tubes de chaudière sans couture d'Astm A192 d'acier au carbone
ASTM A192 Seamless Carbon Steel Boiler Tubes For High-pressure Service Applications: For Boilers,Superheaters,Steam linepipes of boilers Technique: Cold-drawn Steel Grade/Steel Material: SA-450/SA-450M Size range: O.D. 6-168mm W.T. 1-15mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Mechanical
ASTM tuyauterie sans couture et soudée d'A269 d'Austentic d'acier inoxydable pour le service général
ASTM A269 Seamless and Welded Austentic Stainless Steel Tubing for General Service Applications: For auto industry/ machinery use/ decorations Technique: Cold-drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material:TP201, TP304/304L, TP316/316L Size range: O.D. 4-355mm W.T. 1-50mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical
DIN2391 St52 a galvanisé le tube en acier de précision pour le système des véhicules à moteur
DIN2391 St52 Galvanized Precision Steel Tube for Automotive System Material:E215 E235 E355 ST35,ST37.4,ST45,ST52.4 etc Size: OD:4-76mm, Wall thickness:0.5-8mm Surface:NBK, Galvanization/Galvanized/Zinc Coated, Blue White Zinc (Trivalent Chromium Passivation), Plating Colour Zinc(Trivalent Chromium Passivation), Yellow, Army-Green, Phosphated/Black Phosphated Surface quality:Without oxidization, No crack, No fold, No rolling fold, No scar, No laminar defect Tolerance Name
