steel mechanical tubing
"
GOST de TORICH 8731 tubes et tuyaux sans soudure, en acier laminés à chaud de 10# 20# 16Mn pour le transport de gaz
Products Description TORICH GOST 8731 10# 20# 16Mn Hot Rolled Seamless Steel Tubes for Gas Transportation Standard GOST 8731 Material 10#, 20#, 45#, 16Mn, 12CrMo, 15CrMo, 12Cr1MoV etc Size OD: 10.3-1300mm WT: 1-200mm Length: 1-12m Technique Hot Rolled Application For Gas, Air, Water and Oil Transportation, as well as general purpose Mechanical Requirements Grade of Steel Breaking-down point, MPa (kgf/mm²) Yeild point, MPa (kgf/mm²) Relative elongation, % Brinell hardness
SAEJ525 DOM Steel Tube
Quick Detail: SAE J525 Welded Cold Draw Low Carbon Steel Tubing annealed for bending and flaring Size range: O.D.:30-350mm W.T.:1-15mm L: 12000mm or Cut to Short Pieces as specified length Applications: for Bending and Flaring, Auto Parts Manufacture: The tubing is made from flat-rolled steel shaped into a tubular form, the edges of which are joined and fused together by electric-resistance welding. After forming and welding, the tubing is normalized and subject to a cold
La résistance électrique a soudé la surface huilée par tubes d'échangeur de chaleur d'acier au carbone
Products Description TORICH ASTM A178 Electric-Resistance-Welded carbon steel tubes boiler and heat exchanger tubes Standard ASTM A178/A178M, A450/A450M, E213, E273 Matrial Grade A, Grade B, Grade C Size OD: 12.7-127mm WT: 0.9-9.1mm Length: Customer's Requirement Application For Boiler, Superheater and Heat exchanger Manufacture The steel for Grade D shall be killed Tubes shall be made by electric-resistance-welding Test and Inspection Mechanical Test, Tension Test,
Norme ronde sans couture de la tuyauterie ASTM A53 d'acier de construction de haute précision
ASTM A53 Gr.B TypeS Cold Drawn Seamless Structural Pipes Size range: O.D.: 6-168mm W.T.:1-15mm L: max 12000mm Steel Grade and Chemical Compositions: Steel Grade C Mn P S Cr Cu Mo Ni V max max max max max max max max max A 0.25 0.95 0.05 0.045 0.40 0.40 0.15 0.40 0.08 B 0.30 1.2 0.05 0.045 0.40 0.40 0.15 0.40 0.08 Mechanical Properties: Grade Tensil Strength Mpa Yield Point Mpa Elongtation % A ≥330 ≥205 20 B ≥415 ≥240 20 Manufacture: Tubes are made by seamless process.
POIDS soudé aluminisé rond 1.5mm du tube OD 127mm d'acier au carbone pour les pièces des véhicules à moteur
Products Description Round Aluminized Welded Carbon Steel Tube OD127mm*WT1.5mm for Automotive Parts Standard ASTM A513 Size O.D.:6-350mm W.T.:1-12.5mm L:max12000mm Material 1010,1020,1045,SPHC,SPCC,4130 Production ERW + DOM Application For Machinery, Mechanical Engineer, Automotive Parts,Agricultural. Deliver Condition: 1. A.W.H.R. "as welded" from hot-rolled steel 2. A.W.C.R. "as welded" from cold-rolled steel 3. S.D.C.R. "sink-drawn", cold-rolled steel 5. M.D. man
Tuyau d'acier d'alliage de faible densité 10.2-4.5 millimètres de POIDS, tube sans couture titanique pour le produit pétrochimique
Products Description TORICH GB/T 3624 Low Density Titanium Alloy Steel Tube For Petrochemical/Automobile Key Word Titanium Alloy Steel Tube Material TA1,TA2,TA3,TA8,TA8-1,TA9,TA9-1,TA10 Size OD: 4-114mm; WT: 0.2-4.5; Length: 1-12m Application Aerospace, petrochemical, shipbuilding, automobile, medicine etc. Mechanical Porperties Alloy Grade Tensile strength /Mpa specified non-proportional extension strength /Mpa percentage elongation after fracture % TA1 ≥240 140-310 ≥24 TA2
tube en acier soudé par 19.1mmX1.2mm, technique du tube ERW d'acier allié de HC340 HC420
Products Description TORICH Welded Steel Tube 19.1mmX1.2mm HC340 HC420 Alloy Steel Tube for Automobile Parts High Strength Low Alloy Steel Material HC340/HC340LA, HC420/HC420LC etc Size OD: 10mm~50mm WT: 0.5mm~2.5mm Length: according to customer requirement Technique Cold Draw/Cold Rolled, ERW Tolerance It can be controled within OD/Thickness +/-0.1mm Application For Automobile Parts Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or
Matériel sans couture non allié 20# de tuyau d'Omega d'acier au carbone pour la chaudière
Non Alloy Seamless Carbon Omega Steel Pipe Material 20# For Boiler Special Steels Seamless Omega Tube, it is made by Carbon and Alloy Steel, produced by extrusion and cold drawn, the Omega Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according
Tubes et tuyaux sans soudure, en acier étirés à froid/à laminage à chaud pour les machines 1010 1020 1045
Cold Drawn / Hot Rolling Seamless Steel Tubes For Machinery Manufacture: Hot Rolling & Cold Drawn Tolerance of the OD &WT:OD Tolerance:Production MethodOD ToleranceHot Rolling(Extrusion)±1% or ±0.50mmCold Drawn(Cold Rolled)±1% or ±0.30mm Tolerance for wall thickness: 1.Wall thickness tolerance of Hot Rolling steel tube:Production MethodOD (DN)WT/ODToleranceExtruded tube≤102/±12.5% or ±0.40mm>102≤0.05±15% or ±0.40mm>0.05-0.10±12.5% or ±0.40mm>0.10+12.5%-10%Heat expanding steel
