Tube en acier soudé

Precision Cold Drawn Cold Sized Tubes Welded Steel Tubes EN10305-3 For Automobile Introduction Precision cold drawn cold sized tubes, also known as welded steel tubes EN10305-3, are widely used in the automobile industry. These tubes are manufactured with utmost precision to meet the demanding requirements of automotive applications. In this article, we will explore the material, specification, chemical composition, mechanical properties, steel grade, and application of these

SAE J525 ERW / DOM Welded Steel Tube Low Carbon Annealed For Automotive Industry SAE J525 ERW/DOM Welded Low-Carbon Annealed Steel Tube for Automotive Hydraulic Lines SAE J525 ERW/DOM welded steel tube is a normalized, cold-drawn, single-wall low-carbon steel pressure tube designed for automotive fluid-line parts requiring bending, flaring, forming, and brazing. It is a practical choice when the drawing requires tight OD/ID control, good concentricity, a smooth surface, and

ASTM A513 Low Carbon Electric Resistance Welded (ERW) Steel Tube For Truck Exhaust System Product Overview ASTM A513 low carbon ERW steel tube is a cost-effective welded mechanical tubing product designed specifically for truck exhaust system applications. This tubing is ideal for straight exhaust sections, intermediate pipes, tailpipe assemblies, muffler inlet/outlet tubes, and fabricated exhaust connectors. Manufactured from low-carbon steel strip using electric resistance

ASTM A214 is a specification that covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus. These tubes are commonly used in boilers, superheaters, and air coolers. Material and Specification The material used in ASTM A214 is carbon steel, and the tubes are electric-resistance-welded. The specification covers a range of sizes and thicknesses, as shown in the table below.

SA178 Grade A / Grade C / Grade D Electric-Resistance-Welded Carbon & Carbon-Manganese Steel Tube for Heat Exchangers Material SA178 (equivalent to ASTM A178) is a minimum-wall-thickness electric-resistance-welded (ERW) tubing product made from carbon steel (Grade A, Grade C) and carbon-manganese steel (Grade D) . It is widely specified for boiler tubes, boiler flues, superheater flues, and safe ends , and is also commonly selected for heat-transfer service where stable weld

SAE J526 PVF/ Copper Coating Single Wall Bundy Tube For Brake System 1. Standard SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems ASTM A254 Copper-brazed steel tubing 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per

ASTM A254 Copper Brazed Bundy Tube Single Wall Welded Tube 1. Standard ASTM A254 Copper-brazed steel tubing SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s

ACMS ASTM A787 Aluminized Carbon Mild Steel Tube for Exhaust Systems Material ACMS ASTM A787 Type 1 tube is an electric-resistance-welded low-carbon steel mechanical tube made from aluminized steel strip. In practical terms, it combines a formable mild-steel substrate with an aluminum-silicon protective coating, giving the tube a useful balance of heat resistance, corrosion protection, weldability, and manufacturing economy for exhaust service. ASTM A787 covers metallic

Q235 Carbon Structural Steel Welded Square Pipe for Architecture Material Q235 is a mild (low-carbon) structural steel widely specified in China under GB/T 700 . It is commonly produced into welded square hollow sections (SHS) for building and architectural steelwork because it balances strength, weldability, formability, and cost efficiency . Specifications Typical supply options for carbon steel welded square pipe (SHS) : Manufacturing : ERW (Electric Resistance Welded),