seamless carbon steel tube
"
Gigaoctet 28884 300L - tubes et tuyaux sans soudure, en acier de 3000L 30CrMoE 42CrMoE 4130X 4142 pour le cylindre de gaz de large volume
300L~3000L Seamless Steel Tubes for Large Volume Gas Cylinder GB 28884 SPEC: Material:30CrMoE 42CrMoE 4130X 4142 Size Range:OD:80-1200mm WT:4-100mm General Length:4-12m Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Tolerance: According to the following tables or customers’ request. Category Size Tolerance Outside Diameter(D) - ±1%D Minimum Wall Thickness(Smin) D≤559 +25
ASTM A269 316 304 tuyaux d'acier inoxydables sans couture étirés à froid pour le transport liquide 12Cr18Ni9
ASTM A269 316 304 Cold drawn Seamless stainless steel pipes for fluid transport 12Cr18Ni9 Application:Fluid transport size:L--10-12m OD--6-219mm WT--2-50mm steel grade:12Cr18Ni9,06Cr19Ni10 ,022Cr19Ni10,06Cr19Ni10N,06Cr19Ni9NbN,022Cr19Ni10N,06Cr23Ni13,06Cr25Ni20,06Cr17Ni12Mo2,022Cr17Ni12Mo2,07Cr17Ni12Mo2,06Cr17Ni12Mo2Ti Manufacture method:Hot rolling (squeezing, expanding) or cold drawing (rolling) Delivery State:Heat treatment and pickling The Tolerance of Outer Diameter and
Tube en acier roulé très chaud de service de basse température de GB/T 18984
GB/T 18984 Low-temperature-service Piping Seamless Steel Tube Application:Applicable to -45 °C grade ~-100 °C level cryogenic pressure vessel pipe and low temperature heat exchanger pipe seamless steel Size:L--4-12m OD--30-351mm WT--3-25mm Manufacture method:Steel should be smelted with oxygen converter or electric furnace and added outside the furnace Delivery Condition:Normal delivery Processing methods:Hot rolled (expanding) steel pipe--WH cold drawing (rolling) Steel pipe
Cuivre de béryllium d'alliage d'Uns C17200 de tubes et tuyaux sans soudure, en acier de condensateur/cuivre
Beryllium Copper / Copper UNS C17200 Alloy Condenser Seamless Steel Tube 10 - 80mm OD ASTM B111 Copper and Copper-Alloy Seamless Condensers tubes and Ferrule Stock Good quality for heat exchanger General size as OD 19.05, 25 ,12.7 ,WT 1.65 ,1.245 ,2.11. Chemical requirements Copper or copper alloy UNS No. Copper Tin Al Ni incl Co Pb max Fe max Zn max Mn max As Sb P max C44300 70.0-73.0 0.9-1.2 0.07 0.06 remainder 0.02-0.06 C44400 70.0-73.0 0.9-1.2 0.07 0.06 remainder 0.02-0
Tubes et tuyaux sans soudure, en acier étirés à froid/à laminage à chaud pour les machines 1010 1020 1045
Cold Drawn / Hot Rolling Seamless Steel Tubes For Machinery Manufacture: Hot Rolling & Cold Drawn Tolerance of the OD &WT:OD Tolerance:Production MethodOD ToleranceHot Rolling(Extrusion)±1% or ±0.50mmCold Drawn(Cold Rolled)±1% or ±0.30mm Tolerance for wall thickness: 1.Wall thickness tolerance of Hot Rolling steel tube:Production MethodOD (DN)WT/ODToleranceExtruded tube≤102/±12.5% or ±0.40mm>102≤0.05±15% or ±0.40mm>0.05-0.10±12.5% or ±0.40mm>0.10+12.5%-10%Heat expanding steel
Tube en acier laminé à chaud d'alliage de ferrite rond ASTM A335 pour des échangeurs de chaleur
ASTM A335 Round Ferritic Alloy Steel Tubes / Pipe For Heat - Exchangers ASTM A335 Round Ferritic Alloy Steel Tubes / Pipe For Heat - Exchangers Size range: O.D.:6-420mm W.T.:1-50mm L: according to customer requirement Each length of pipe passed the hydrostatic test and non-destructive examination method . Other tests :Chemical Composition Tests ,Mechanical Tests(Tensile strength,Yield Strength,Elongation,Flaring ,Flattening,Bending ,Hardness,Impact Test), Surface ,Dimension
Tube en acier laminé à chaud d'Astm A321, barre d'acier au carbone gâchée éteinte 6,35 - 241.3mm
ASTM A321 Hot-rolled,quenched,and Tempered Carbon Steel Bars 6.35-241.3mm Out Diameter 1. Scope This specification covers hot-rolled, quenched, and tem-pered carbon steel bars, of the following sections and sizeranges: 1)Rounds, '% to 9/ in. (6.35 to 241.3 mm) incl, indiameter. 2)Squares, '/4 to 5/ in. (6.35 to 139.7 mm) incl,between parallel surfaces. 3)Hexagons, '/4 in. (6.35 mm) and over betweenparallel surfaces. The values stated in inch-pound units are to be regardedas
Dessiné au-dessus de l'industrie automobile 1020 d'Astm A513 Bk de tube d'acier au carbone de mandrin
Drawn Over Mandral 1020 ASTM A513 BK Automotive Industry Carbon Tube Introduction: Name Drawn Over Mandral 1020 ASTM A513 BK Automotive Industry Carbon Tube OD 15-100mm WT 1- 10mm Standard ASTM A513 Usage Mechanical Tubing Material Mt1010,1020,1015 Packing Packing in bundles Payment T/T,L/C,Western Union,Money Gram Delivery FOB,CIF,CFR,CPT Chemical components: Grade Carbon Manganese Phosphorus max Sulfur max 1010 0.05-0.15 0.3-0.6 0.035 0.035 1015 0.1-0.2 0.3-0.6 0.035 0.035
tubes et tuyaux sans soudure, en acier de recuit lumineux de diamètre de 25mm pour les circuits hydrauliques
EN10305-1 E235 E355 NBK Bright Annealing Precision Steel Pipes for Hydraulic Systems EN10305-1 NBK Bright Annealed Precision steel pipes for Hydraulic system OD:4-80 (mm) WT0.5-10 (mm) Length 1000-12000mm Product name: Seamless Precision Steel Pipe Application: for hydraulic systems precision steel pipes for Hydraulic system OD (mm) WT (mm) Length (mm) 4 0.5 5800-6000 4.0 1.0 5800-6000 5.0 1.0 5800-6000 6.0 1.0 5800-6000 6.0 1.5 5800-6000 8.0 1.0 5800-6000 9.5 0.89 5800-6000
