steel mechanical tubing
"
l'épaisseur de paroi de 24mm a soudé le tuyau d'acier spécial ST37.0, ST44.0 de rectangle
Seamless and Welded Rectangle Steel Tubes , Special Steel Pipe Seamless Rectangle Steel Tubes Welded Rectangle Steel Tubes Carbon Steel Stainless Steel Alloy Steel Carbon steel ST37.0,ST44.0, Q235,Q345, SAE1010,SAE1020,SAE1045 For application of structure and mechanical use Size range: Square tubes O.D. :20-20 to 500-500 W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600 W.T.:1-24mm L:max12000m
Tuyauterie sans couture 41Cr4 40Cr DIN1.7035 d'acier allié pour la roue de vitesse/axe
Alloy Steel Tubes 41Cr4 40Cr DIN1.7035 Seamless Steel Tubes with alloy steel grade 41Cr440CrDIN1.7035 International equivalent: JIS: SCr440 ASTM: 5140 ISO: 41Cr4 41Cr4DIN1.7035: C:0.42 Si:0.25 Mn:0.70 Cr: 1.05 40Cr: C:0.37-0.44 Si:0.17-0.37 Mn:0.50-0.80 Cr:0.80-1.10 Seamless steel tubes with these steel grade could achieve good mechanical properites with quenching and tempering heat treatment (QT), could also heat treatment with annealed. Application: Gear wheel, axle, shaft,
Tube sans couture laminé à chaud de l'acier au carbone 35crmo4/tube lourd de tuyau d'acier de mur
Descriptions of Carbon Welded/Seamless Steel Pipe Product Name Hot Rolled Carbon 35crmo4 Seamless heavy wall Steel Pipe tube Standard ASTM A106, ASTM A53, API 5L Gr.B, DIN17175,DIN1629 Outer Dia: 10mm-1500mm Wall Thickness 2mm-70mm Dia Tolerance Control with in the standard, OD:+-1%, WT:+-10% Materials 10#,20#, 45#,16Mn,A106(B,C),A53(A,B),API J55,API K55,Q235,Q345,ST35.8,ST37,ST42,ST45,ST52 Inspection ISO,BV,SGS,MTC Packing Waterproof paper, and steel strip packed. Standard
Tube sans couture d'acier inoxydable du duplex 2507 d'équipement sous pression
TORICH Supplier Stainless Steel Seamless Duplex Tube Material:329J3L 1.4462 Mechanical Property No. Unified digital code Steel Grade Recommended heat treatment system Tensile property Hardness Tensile strength Rm/(N/mm2) Non proportional extension strength Rp0.2/(N/mm2) Elongation HBW HRC ≥ ≤ 1 S21953 022Cr19Ni5Mo3Si2N 980℃~1040℃ Rapid cooling 630 440 30 290 30 2 S22253 022Cr22Ni5Mo3N 1020℃~1100℃ Rapid cooling 620 450 25 290 30 3 S22053 022Cr23Ni5Mo3N 1020℃~1100℃ Rapid
Tuyau d'acier Incoloy 800 Inconel 600 d'alliage de GB/T 30059 sans couture pour l'échangeur de chaleur
Products Description: Seamless Corrosion-resisting Alloy Tubes GB/T 30059 Incoloy 800 Inconel 600 For Heat-exchanger Steel Grade/Steel Material: Steel Grade ASTM Steel Grade C Cr Ni Fe Mo Cu Al Ti Nb Co Si Mn P S NS1101 N08800 (Incoloy 800) ≤0.010 19.0-23.0 30.0-35.0 Remainder - ≤0.75 0.15-0.60 0.15-0.60 - - ≤1.00 ≤1.50 ≤0.030 ≤0.015 NS1102 N08810 (Incoloy 800H) 0.05-0.10 19.0-23.0 30.0-35.0 Remainder - ≤0.75 0.15-0.60 0.15-0.60 - - ≤1.00 ≤1.50 ≤0.030 ≤0.015 NS1103 - ≤0.030
20G Tube en acier sans soudure de type Oméga pour chaudières haute pression, fabrication étirée à froid
Tubes oméga sans soudure de qualité chaudière 20G pour les applications haute pression. Étiré à froid pour des dimensions précises, certifié GB/T 5310 (comparable à ASTM A192/A210). Longueurs personnalisées de 1 à 12 m avec des tolérances serrées. Conçu pour l’efficacité du transfert de chaleur et l’intégrité de la pression.
JIS G3466 Tubes en acier au carbone carré standard avec STKR400 et STKR490 Grades de 20 × 20 mm à 350 × 350 mm Dimensions
JIS G3466 Carbon Steel Square Steel Tube For General Structural Purposes Product Overview JIS G3466 carbon steel square steel tube is a cold-formed or formed structural hollow section used for general civil engineering, architectural, and fabricated steel structures. Under JIS G3466, the standard grade symbols are STKR400 and STKR490; STKR400 is selected for general structural frames, while STKR490 is used when higher yield and tensile strength are required. The tube is
Tube en acier soudé inoxydable de ferrite/austénitique pour le service de corrosion générale
ASTM A790 Ferritic or Austenitic Stainless Steel Welded Tubes or Seamless tubes for general corrosion service Size range: O.D.: 4.0-230mm W.T.:1-30mm L: according to customer requirement Material and Manufacture: S31200, S31260, S31500, S31803, S32003, S32101, S32202,S32205, S32304, S32506, S32520... Tubes are made from Flat-rolled steel by automatic welding process. Subsequent to welding and prior to final heat treatment, the tubes are cold drawn or cold rolled Duplex
Le produit doit être présenté dans un emballage de qualité supérieure.
Products Description TORICH GB/T 13912-2002 Seamless and Welded Hot Dip Galvanized Steel Machining Tube for Bush Arm Standard GB/T 13912-2002 Size OD: 30-400mm WT: 0.5-20mm, Length : 1000mm-12000mm Material Q195, Q215, Q235 etc Carbon Steel Surface Hot Dip Galvanized Coatings Application For Bush Arm etc machining products Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: 1. Incoming Raw
