steel mechanical tubing
"
Tuyau d'acier structurel formé chaud sans couture rond 10, 20, 35, 45, 10Mn2, 15Cr, 20Cr
GOST 8732-78 10 , 20 , 35 , 45 , Seamless Hot-Formed Steel Pipes , Structural Steel Pipe, Structural Steel Tube GOST 8732-78. Seamless Hot-Formed Steel Pipes Outside Diameter: 32 – 219 mm (32; 33,7; 38; 42; 42,4; 45; 48,3; 50; 51; 54; 57; 60; 60.3*; 63,5; 68; 70; 73; 76; 82,5*; 83; 89; 95; 102; 108; 114; 121; 127; 133; 140; 146; 152; 159; 168; 178*; 180; 194; 203; 219) Wall Thickness: 2.8 – 46 mm (2,8; 3; 3,2*; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7; 7,5; 8; 8,5; 9; 9,5; 10; 11; 12;
Les tuyaux d'acier travaillés froids mécaniques d'alliage ont recuit AISI4130 AISI4140
Alloy steel 4130 4140 for ASTM A519 seamless steel tubes ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% Sizing Method: 1. HF- hot finished 2.CW-cold worked Themal
Tube sans couture UNS N08925 d'acier inoxydable d'alliage de nickel d'ASTM B677 UNS N8904
Seamless, Cold-worked or Hot-finished pipe and tube intended for general corrosive service. Steel Grade: UNS N08904,UNS N08925,and UNS N08926 Materials and Manufacture: The material is supplied in the solution-treated condition Tests: Chemical Analysis - One test per lot Machanical Properties - One test per lot Non-destructive Test - Each Piece in each lot Average Diameter: The average if the maximum and minimum outside diameters as determined at any one cross section of the
Lengyh adapté aux besoins du client par tuyau d'acier spécial sans couture avec le carbone Sae1010 Sae1020
Seamless Alloy Steel Tube Special Steel Pipe With Carbon SAE1010, SAE1020 Steel Grade: ST35.8, ST37.0, ST44, ST52; E155, E195, E215, E235, E275, E355; 195GH, P235GH, P265GH, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2; SAE1010, SAE1020, SAE1036, SAE1035, SAE1045; Carbon steel tube: SA178, A179, A192, A210, SA213, SA214, etc. Other steel grade would be available, please advise and check with our sales. Size range: O.D.: 12.7-177.8mm W.T.: 1-25.4mm L: according to
Tuyau d'acier sans couture d'alliage de T1 T1a T1b ASTM A209 pour la chaudière et le surchauffeur
ASTM A209 T1 T1a T1b Seamless Alloy Steel Tubes For Boiler and Superheater Size range: O.D.: 6-420mm W.T.:1-50mm L: according to customer requirement Steel Grade and Chemical Compositions: Element T1 T1a T1b Carbon 0.10-0.20 0.15-0.25 0.14max Manganese 0.30-0.80 0.30-0.80 0.30-0.80 Phosphorus 0.025 0.025 0.025 Sulfur max 0.025 0.025 0.025 Silicon 0.10-0.50 0.10-0.50 0.10-0.50 Molybdenum 0.44-0.65 0.44-0.65 0.44-0.65 Mechanical Properties: Element T1 T1a T1b Tensile strength
Échangeur de chaleur en U de tube sans couture d'acier inoxydable d'ASTM A213
ASTM A213 Seamless Stainless Heat Exchanger U Shaped Tube Size Range: OD:6-127mm, WT:0.5-12mm, Length: max12000mm Material: Grade: T12 TP304 TP304L TP316 TP316L TP317 TP317L TP321 Manufacture: Tubes shall be made by the seamless process and shall be either hot finished or cold finished. SA213 long steel tubes, make to U bend tubes for boilers and heat exchangers. Heater tubes U TUBES with Stainless, Alloy steel grade available, Carbon Steel grade is also available. Mechanical
Tuyau d'acier sans couture d'alliage de C27000 C27200 H58 ASTM B135 pour l'industrie militaire
Products Description TORICH ASTM B135 C27000 C27200 H58 Seamless Brass Round TubeStandardASTM B135 Standard Specification for SeamlessBrassTubeMaterialC27000 C27200SizeWT: 0.2-120mm; OD: 2-914mm; Length: 2m,4m,5.8m,6m,12m or per customer’s requestSurfaceMill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required.ManufacturerPipes shall be made by the seamless process.ApplicationsResidential housing water pipes, heating, cooling pipes installed aviation,
Tube d'acier inoxydable de 2 pouces pour des échangeurs de chaleur/condensateurs 304 316
2 inch stainless steel tubing for Heat Exchangers / Condensers 304 316 Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Delivery Conditions: Symbols
3 norme extérieure du vacarme recuite par coude 2605 d'acier inoxydable de tube d'acier inoxydable de soudure de manière
Din 2605 SS304 316L 180 90 Degree Short Radius 8 6 4 Inch Reducing Fittings 3 Way Weld Pipe Tube Stainless Steel Elbow Size: seamless 1/2'~12' (DN15-DN600) welded 1/2'~12' (DN15~DN1200) Standard: ASME B16.9 ; DIN2605 ; JIS Thickness: SCH5S-SCH160 Material: 317/L ; 304/L;316/L;310/S;309/S;347/H;321/321/H;904/L Applications: Dairy, food, beer, beverage, pharmacy, cosmetic, etc DN NPS OD Center to End Center to Center 25 1 32 33.4 25 50 32 1 1/4 38 42.2 32 64 40 1 45 48.3 38 76
