precision steel pipe
"
Tuyaux d'acier inoxydables sans couture de GB/T14976 ASTM A269 A312 pour le transport de Fliuid
Product Name:TORICH GB/T14976 ASTM A269 A312 Seamless Stainless Steel pipes for fliuid transport Standard: GB/T14976 ASTM A269 A312 OD: 3-420mm WT: 0.5-50mm Length: 1-12m or according to customers' actual application and production. Application:for fliuid transport Steel Grade:201/202/304 /304L/316/316L321/310s/410/420/430/440/439ect Technology:Cold Rolled Hot Rolled Cold Drawn Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision
Acier allié rond fait sur commande des tubes et tuyaux sans soudure, en acier de TORICH 34CrMo4 avec le traitement thermique
TORICH Custom Round 34CrMo4 Alloy Steel Pipe With Heat Treatment Good surface quality Material:34CrMo4 Chemical composition: C:0.30~0.37 Si:0.10~0.40 Mn:0.60~0.90 S:permissible residual content ≤0.035 P:permissible residual content ≤0.035 Cr:0.90~1.20 Ni:permissible residual content ≤0.030 Cu:permissible residual content ≤0.030 Mo:0.15~0.30 Mechanical properties: Tensile strength σb (MPa):≥985(100) Yield strength σs (MPa):≥835(85) Elongation δ5 (%):≥12 rate of reduction in
Vacarme sans couture En10297 1 - 12m de tube d'acier inoxydable de carbone général d'ingénierie
DIN EN10297 E235 E275 E470 Seamless Steel Tubes for Mechanical and General Engineering Purposes The Seamless Steel Tubes are produced by Cold Drawn or Cold Rolled, for small diameters below 88.9mm, the bigger diameter are produced by hot rolling. These steel tubes will be used for mechanical engineerings, could be also used as mother tube for further cold drawn production to achieve better tolerance and surface smoothness as precision steel tubes. Classification of steel
Longueur épaisse lourde douce 1-12m de mur de tubes et tuyaux sans soudure, en acier de carbone à haute pression
TORICH Seamless Carbon Mild 300mm Large Diameter ST37 15Mo3 High Pressure 4 Inch C45 Heavyr-caliber Heavy Thick Wall Steel Pipe Size Range: OD:20-300mm WT: 5-50mm Length: Max 12000mm Characteristic: Good OD and ID tolerance controlled to Technical Standard Stable quality Tolerances: OD: D 5 – 10 mm: ± 0.15 mm D 11 – 30 mm: ± 0.30 mm D 32 – 50 mm: ± 0.40 mm D 51 – 140 mm: ± 0.8% WT: S 0.4 – 1 mm: ± 0.12 mm S 1.2 – 5 mm: ± 10% S 5.5 – 12 mm: ± 8% Notes: 1. Steel grades: 10, 20,
Le diamètre 4-1200mm a soudé les tuyaux d'acier 316/316L inoxydables pour le liquide GB/T 12771
Welded Stainless Steel Pipes for Liquid Service GB/T 12771 SPEC: Material:304/304L 316/316L Diameter : 4-1200mm Wall thickness : 0.3-200mm Length : 2-12m Upon customer's request Tolerance: According to the following tables or customers’ request. Table 1 Tolerance of OD Classification D Permissible Tolerance A B H All Dimensions ±0.5% or ±0.20 ±0.75% or ±0.30 T ＜40 ±0.20 ±0.30 ≥40~＜65 ±0.30 ±0.40 ≥65~＜90 ±0.40 ±0.50 ≥90~＜168.3 ±0.80 ±1.00 ≥168.3~＜325 ±0.75%D ±1%D ≥325~＜610 ±0
Tubes et tuyaux sans soudure, en acier étirés à froid/laminés à froid de GB/T3639 de précision pour l'application de précision
GB/T3639 Cold Drawn Or Cold Rolled Precision Seamless Steel Tubes For Precision Application Material Material Type Description Steel Carbon Steel, Alloy Steel, Stainless Steel Specification Specification Details Standard GB/T3639 Outer Diameter 6-168mm Wall Thickness 0.5-15mm Length 5.8m, 6m, 11.8m, or customized Chemical Composition The chemical composition of GB/T3639 precision seamless steel tubes may vary depending on the specific steel grade. Below is a general overview:
Tubes et tuyaux sans soudure, en acier EN10305-4 de précision étirée à froid pour le circuit hydraulique
Seamless Steel Tube Cold Drawn Precision Carbon Steel Tube EN10305-4 For Hydraulic System Seamless steel tubes are used in a wide range of applications, from construction to automotive and hydraulic systems. One specific type of seamless steel tube that has gained popularity in recent years is the cold drawn precision carbon steel tube EN10305-4. This article will provide an overview of this type of seamless steel tube, including its material, specification, chemical
GB/T 32957 Tubes en acier sans soudure de précision laminées à froid pour le service des systèmes hydrauliques et pneumatiques
GB/T 32957 Cold-Rolled Precision Inside Diameter Seamless Steel Tubes For Hydraulic And Pneumatic System Service Material The GB/T 32957 standard specifies cold-rolled precision inside diameter seamless steel tubes for hydraulic and pneumatic system service. These tubes are made from high-quality steel that ensures their strength and durability. Specification The specification outlined in GB/T 32957 provides detailed guidelines and requirements for the manufacturing of
EN 10305-3 28Mn6 Tubes en acier au carbone soudés à froid de 30 à 426 mm de diamètre extérieur pour des applications de précision
EN 10305-3 / 28Mn6 Welded Cold-Sized Carbon Steel Tube for Precision Applications Material Overview EN 10305-3 (Welded Cold-Sized Tubes) defines the technical delivery conditions for welding cold-sized steel tubes used in precision applications.“28Mn6” (steel number 1.1170) is a heat-treatable, manganese-containing carbon steel grade commonly used in mechanical and automotive applications. When used in welded cold-sized tubes under EN 10305-3, 28Mn6 provides a balance of
